KOSA Valve · Sanitary Valves
King Lai Air Relief Valve — Air Removal · No Product Loss
The King Lai air relief valve removes air from a line without loss of product, and its housing carries a plastic ball that closes against the upper or lower seat as pressure conditions change.
KOSA supplies King Lai air relief valves for pipeline and container tops, where an air pocket can form during operation and air binding has to be prevented.
Last updated:
Introduction
The air relief entry in the King Lai catalogue describes the assembly and then the behaviour. The valve consists of a ferrule, a housing with a plastic ball and a vent pipe connected by heavy duty clamps, and it will not let air enter the line or container under negative pressure. The lightweight ball is freely moving and, depending on pressure conditions, closes against the upper or lower seat. The recommended position is the top of a pipeline or container, where it bleeds the line and prevents air binding caused by an air pocket formed during operation (A p6 L016–L037).
Features
- Construction is a ferrule, a housing with a plastic ball and a vent pipe connected by heavy duty clamps (A p6 L022–L026).
- The valve will not let air enter the line or container under negative pressure (A p6 L026–L028).
- Mounted on the top of a pipeline or container it bleeds the line and prevents air binding (A p6 L033–L037).
Specifications
| Parameter | Value |
|---|---|
| Valve type | Air relief valve |
| Construction | Ferrule, housing with plastic ball, vent pipe |
| Connection | Vent pipe connected by heavy duty clamps |
| Function | Removes air from a line without loss of product |
| Pressure, size and temperature ratings | Contact KOSA for specs — no ratings are published on the catalogue page |
Data: King Lai catalog A p6. Confirm final selection against the manufacturer's datasheet.
How to choose
| Condition | Recommended |
|---|---|
| Air must be bled from the high point of a line or container | King Lai air relief valve |
| The tank outlet must be emptied and drained | King Lai tank bottom diaphragm valve |
| A viscous product must be recovered from the pipe | King Lai arc valve |
Frequently asked questions
What does the King Lai air relief valve consist of?
A ferrule, a housing with a plastic ball and a vent pipe connected by heavy duty clamps (A p6 L022–L026). (Source: King Lai catalog A p6 L016–L037.)
Does the valve let air enter under negative pressure?
No. The catalogue states it will not let air enter the line or container under negative pressure (A p6 L026–L028). (Source: King Lai catalog A p6 L016–L037.)
Where should the air relief valve be mounted?
On the top of a pipeline or container, to bleed the line where an air pocket may have formed during operation and prevent air binding (A p6 L033–L037). (Source: King Lai catalog A p6 L016–L037.)
Need a quote or full specification?
KOSA supplies King Lai air relief valves — send your media, pressure, temperature and quantity for a matched proposal.
Request a quote