KOSA Valve · Sanitary Valves
King Lai Sanitary Piston Valve — Change-Over & Shut-Off · Pneumatic
The King Lai sanitary piston valve is a hygienic seat valve used for media flow shut-off in a single direction or for flow divert in multi-port service, with a pneumatic regulation type that takes a 4–20 mA opening signal.
KOSA supplies King Lai piston valves and pneumatic regulation valves for food processing, beverage production and fine chemical lines.
Last updated:
Introduction
The catalogue groups this family as seat valves — change-over valves, shut-off valves and regulation valves. The piston valve body is described for media flow shut-off in a single direction or flow divert in multi-ports, with a special suction-proof design that prevents the seal ring from being sucked out by negative pressure in the piping system. Applications listed are food processing, beverage production and fine chemical industries (A p5 L018–L037).
Features
- Media flow shut-off in a single direction, or flow divert in multi-port service (A p5 L027–L029).
- Special suction-proof design stops the seal ring being drawn out by negative pressure in the line (A p5 L031–L033).
- Pneumatic regulation option: a diaphragm cylinder with 4–20 mA current controls the opening level of the valve (A p5 L025–L031, regulation valve column).
Specifications
| Parameter | Value |
|---|---|
| Valve function | Change-over (seat) and shut-off |
| Flow duty | Media flow shut-off in one direction; flow divert in multi-ports |
| Seal protection | Suction-proof design against negative-pressure seal pull-out |
| Regulation option | Pneumatic diaphragm cylinder, 4–20 mA opening control |
| Application | Food processing, beverage production, fine chemical |
Data: King Lai catalog A p5. Confirm final selection against the manufacturer's datasheet.
How to choose
| Condition | Recommended |
|---|---|
| Flow direction must be diverted across multiple ports | Piston change-over valve (multi-port divert) |
| A line must be shut off cleanly with a hygienic seat | Piston shut-off valve |
| Opening must follow an analogue control signal rather than open/close | Pneumatic regulation valve with 4–20 mA control |
Frequently asked questions
Can one piston valve body do both shut-off and flow divert?
The catalogue states the piston valve body is applied for media flow shut-off in a single direction or flow direction divert in multi-ports (A p5 L027–L029). (Source: King Lai catalog A p5 L018–L037.)
Is 4-20 mA control a property of the piston change-over valve itself?
No. The 4–20 mA signal belongs to the pneumatic regulation valve type, whose diaphragm cylinder uses 4–20 mA current to control the opening level (A p5 L025–L031). (Source: King Lai catalog A p5 L018–L037.)
How does the valve protect its seal under negative pressure?
A special suction-proof design prevents the seal ring in the valve seat from being sucked out by negative pressure in the piping system (A p5 L031–L033). (Source: King Lai catalog A p5 L018–L037.)
Need a quote or full specification?
KOSA supplies King Lai piston valves — send your media, pressure, temperature and quantity for a matched proposal.
Request a quote