KOSA Valve · Sanitary Valves
King Lai Tank Bottom Diaphragm Valve — Tank Outlet · Unload & Drain
The King Lai tank bottom diaphragm valve is installed at the bottom of tanks to unload and drain the material in food, pharmaceutical and fine chemical industries.
KOSA supplies King Lai tank bottom diaphragm valves as the tank outlet for food, pharmaceutical and fine chemical plants, alongside the in-line sterile diaphragm valve range.
Last updated:
Introduction
The tank bottom entry in the King Lai catalogue explains the placement rather than a specification: these valves are usually installed at the bottom of tanks in food, pharmaceutical and fine chemical industries in order to unload and drain the material (A p6 L034–L039). It is a tank outlet valve, so the body sits at the lowest point of the vessel where the product leaves; the in-line sterile diaphragm valve on the same catalogue is a separate range used within the piping. The catalogue figure shows two pneumatic versions: a dome-type actuator, and a cylinder actuator carrying a position indicator.
Features
- The valve is installed at the bottom of tanks to unload and drain the material (A p6 L037–L039).
- Service industries named are food, pharmaceutical and fine chemical (A p6 L037–L038).
- The catalogue figure shows two pneumatic versions, a dome-type actuator and a cylinder actuator with a position indicator (A p6, tank bottom valve figure).
Specifications
| Parameter | Value |
|---|---|
| Valve type | Tank bottom diaphragm valve |
| Installation | At the bottom of tanks, as the unloading outlet |
| Function | Unload and drain the material |
| Industries named | Food, pharmaceutical and fine chemical |
| Pressure, size and temperature ratings | Contact KOSA for specs — no ratings are published on the catalogue page |
Data: King Lai catalog A p6. Confirm final selection against the manufacturer's datasheet.
How to choose
| Condition | Recommended |
|---|---|
| The tank must be emptied and drained from its lowest point | King Lai tank bottom diaphragm valve |
| A diaphragm valve is needed within the pipe run rather than at the tank outlet | King Lai sterile diaphragm valve DN4–DN80 |
| A viscous product must be pushed along the pipe without loss | King Lai arc valve |
Frequently asked questions
Where is the King Lai tank bottom diaphragm valve installed?
At the bottom of tanks, to unload and drain the material (A p6 L034–L039). (Source: King Lai catalog A p6 L034–L039.)
Which industries does the catalogue name for this valve?
Food, pharmaceutical and fine chemical industries (A p6 L037–L038). (Source: King Lai catalog A p6 L034–L039.)
How does this valve differ from the in-line sterile diaphragm valve?
The tank bottom valve is the tank outlet at the lowest point of the vessel; the sterile diaphragm valve DN4–DN80 is the separate in-line range listed earlier in the same catalogue (A p6 L034–L039). (Source: King Lai catalog A p6 L034–L039.)
Need a quote or full specification?
KOSA supplies King Lai tank bottom diaphragm valves — send your media, pressure, temperature and quantity for a matched proposal.
Request a quote