Chemical and petrochemical engineers face challenges in selecting ball valves that meet stringent requirements for corrosion resistance and fugitive-emission control. A typical application involves 10 bar pressure, 50°C temperature, and 100 m³/h flow rate. Ensuring compatibility with corrosive media, such as 10% HCl, is crucial. ATEX compliance and ISO standards are also essential considerations. The selection process demands careful evaluation of various factors.

Corrosion Resistance and Material Selection

Corrosion resistance is critical in chemical and petrochemical applications. The 30E01 Flange ball valve and 30C05 Lined with PTFE ball valve offer excellent resistance to corrosive media. The 30E01 Metal sealing Ball Valve features a metal-to-metal seal, providing a high level of tightness. Material selection, such as stainless steel or PTFE, depends on the specific application requirements.

The 30V26 V-type Ball Valve is designed for applications requiring a high level of corrosion resistance. Its V-port design allows for precise control and minimizes erosion. In contrast, the 30S11 Plastic Ball Valve is suitable for applications with less demanding requirements.

Fugitive-Emission Control and Valve Design

Fugitive-emission control is essential for environmental and safety reasons. The 30N01 Three piece ball valve and 30T/L01 Three way ball valve feature a fire-safe design, ensuring minimal emissions. The 30G07 High pressure ball valve is designed for high-pressure applications, with a focus on safety and reliability.

In practice, valve design plays a crucial role in fugitive-emission control. A well-designed valve can minimize emissions and ensure safe operation. The Ball Valves range offers various designs to suit specific application requirements.

Trade-Offs and Limitations

Selecting the right ball valve involves trade-offs between factors such as corrosion resistance, fugitive-emission control, and cost. For example, increasing corrosion resistance may come at the cost of higher valve cost. The 30G25 Fixed ball valve offers a balance between corrosion resistance and cost.

There are limits to the suitability of certain valve designs. For instance, the Insulation ball valve is designed for applications requiring thermal insulation, but may not be suitable for high-pressure applications. It is essential to evaluate the specific requirements of each application.

Comparison of Valve Options

Valve Type Corrosion Resistance Fugitive-Emission Control
30E01 Flange ball valve High Medium
30C05 Lined with PTFE ball valve Very High High
30V26 V-type Ball Valve High High

Valve selection depends on various factors. The table above highlights the strengths of different valve options. Chemical engineers should consider these factors when selecting a ball valve for their application.

Conclusion and Additional Considerations

Selecting the right ball valve for chemical and petrochemical applications requires careful evaluation of various factors. The Control & Regulating Valves range offers a variety of solutions for process control applications.

This selection guide does not apply to applications with extreme temperatures or pressures. Unsuitable valve designs should be avoided in these situations. In such cases, consult with a valve expert to determine the best solution.

Common questions on ball valves

Floating ball or fixed (trunnion) ball?

In a floating-ball design the ball is pushed against the downstream seat by the line pressure, which suits smaller sizes and moderate pressures. A fixed ball design anchors the ball on trunnions and relieves the seat load, which is the route for larger sizes and higher pressures.

Soft seat or metal seat?

Soft seats give a tighter shut-off at moderate temperatures; metal seats survive high temperature, abrasive media and frequent cycling at the cost of a higher leakage class. The duty temperature and the media decide it, not the purchase price.

When does a lined ball valve make sense?

When the media attacks the body material but the pressure and temperature stay within the lining's envelope. The PTFE liner isolates wetted surfaces from the body, but it adds a thickness that restricts the bore and a lining that can be damaged by abrasive particles.